How do I configure the maximum number of connections that can be established by a user on a WLAN device

3

On a WLAN device, run the local-user user-name access-limit max-number command in the AAA view to configure the maximum number of connections that can be established by a user.

Other related questions:
How to configure the number of concurrent user logins on an AC's built-in Portal server
When local AAA authentication is implemented, the administrator can set the maximum number of connections that a local user can establish. For example, the local user admin1 is created and allowed to log in to the device using Telnet. If the maximum number of connections is set to 1, the local user can establish only one connection with the device after login using Telnet. Enter the AAA view, and set the maximum number of connections that a local user can establish to 1. system-view [AC6605] aaa [AC6605-aaa]local-user admin1 access-limit 1

How do I configure the timeout interval for a user connection on a WLAN device
If a user does not perform any operation after logging in to a WLAN device, the user interface is always occupied, resulting in a waste of resources. In this case, run the idle-timeout minutes [seconds] command in the user interface view. After this command is executed, the system automatically disconnects idle users connected for a long time. You are advised to set the timeout interval to 10�?5 minutes. If AAA authentication is configured and the local-user idle-timeout command is executed in the AAA view to configure the timeout interval of a user disconnection, the timeout interval configured in the AAA view has a higher priority than that configured in the user view. If the timeout interval for a user disconnection is not configured in the AAA view or the undo local-user idle-timeout command is executed, the timeout interval configured in the user view using the idle-timeout command takes effect. For example, set the timeout interval to 1 minute and 30 seconds. system-view [HUAWEI] user-interface console 0 [HUAWEI-ui-console0] idle-timeout 1 30 //By default, a user is disconnected if the user does not perform any operation within 10 minutes.

How Many Firewalls Can a User Have?

A user can have a maximum of 200 firewalls. It is recommended that you configure a maximum of 20 inbound or outbound rules for each firewall. If more than 20 inbound or outbound rules are configured, the forwarding performance will deteriorate.


How to configure the number of access users supported by Portal authentication on a WLAN device
To configure the number of access users supported by Portal authentication on a WLAN device, perform the following operations: 1. Run the system-view command to enter the system view. 2. Run the authentication-profile name authentication-profile-name command to enter the authentication profile view. 3. Run the authentication max-user max-user-number command to configure the maximum number of authenticated users allowed in a VAP profile. The maximum number of access users can also be configured in a service set or an AP profile. If the parameter is configured in both of them, the smaller value takes effect.

5300 V3 remote replication specifications
OceanStor 5300 V3 remote replication specifications are as follows: Maximum number of remote replication pairs (synchronous + asynchronous): 256 Maximum number of secondary LUN in each pair: 1 (synchronous) or 2 (asynchronous) Maximum number of connected remote storage devices: 32 Maximum number of remote replication consistency groups: 64 Maximum number of members in a remote replication consistency group: 64 For detailed specifications, see V3R1 Latest Software Specifications.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top