Does a single-radio AP configured with multiple SSIDs support the same number of access users as an AP configured with one SSID

4

Yes, an AP configured with multiple SSIDs supports the same number of access users as an AP configured with one SSID.

Other related questions:
Does an AP configured with multiple SSIDs support the same number of access users as an AP configured with one SSID
Yes. An AP configured with multiple SSIDs supports the same number of access users as an AP configured with one SSID.

Can an AP (single radio) with different SSIDs work at different channels
An AP with different SSIDs cannot work at different channels. A radio has only one channel.

Can a single-radio AP with different SSIDs work at different channels
A single-radio AP with different SSIDs cannot work at different channels. This is because a radio has only one channel.

Configure multiple SSIDs for a WLAN
Configure multiple SSIDs for a WLAN. One SSID indicates a wireless signal for users. All the ACs and APs can be configured with multiple SSIDs, that is, one device can send multiple radio signals. Configuration: 1. Add a new service set (New WLAN-BSS/WLAN-ESS interfaces must be added.), and configure parameters such as the SSID. 2. Invoke this service set in the AP radio. 3. A single radio can invoke multiple service sets. Different radios can invoke the same service set (applicable to the AC). Note: - Creating new wireless networks has no effect on existing networks. - Each service set can be configured with different parameters such as encryption and authentication. - Each service set maps one VLAN, namely, one address pool and one IP address segment. - Do not reuse the service set on 2.4 GHz and 5 GHz frequency bands when configuring multiple SSIDs for Fat APs.

How to isolate STAs associated with the same SSID of an AP
Huawei APs support local Layer 2 isolation. After Layer 2 isolation is enabled, local STAs cannot communicate at Layer 2, and data can only be transmitted between uplink ports and VAP ports. To enable Layer 2 isolation, configure it on an AC.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top