WLAN service set

4

WLAN service set
A wireless network consists of radio profiles and service sets.
- A radio profile contains WMM (QoS) profiles.
- A service set contains traffic and security profiles, SSIDs, and WLAN-ESS/WLAN-BSS interfaces (wireless air interfaces). Service VLANs must be configured on ACs.
- The wireless air interface is the logical interface for APs to connect to a STA. Typically, the wireless air interface is configured to work in hybrid mode.

Other related questions:
How do I disable WLAN radios and service sets as scheduled
For V200R005, the configuration is as follows: Configuration on an AC: [Huawei]wlan [HuaweiHuawei-wlan-view]auto-off service radio ap-id 0 radio-id 0 start-time 1:00:00 end-time 7:00:00 //Disable the radio. [Huawei-wlan-view]auto-off service ess service-set id 0 start-time 01:00:00 end-time 07:00:00 //Disable the service set. Configuration on a Fat AP: [Huawei]wlan [Huawei-wlan-view]auto-off service radio interface wlan-radio0/0/0 start-time 1:00:00 end-time 7:00:00 [Huawei-wlan-view]auto-off service ess service-set id 0 start-time 01:00:00 end-time 07:00:00 For V200R006, the configuration is as follows: Configuration on an AC: [Huawei]wlan [Huawei-wlan-view]ap-id 1 [Huawei-wlan-ap-1]radio 0 [Huawei-wlan-radio-1/0]radio disable//Disable the radio. [Huawei-wlan-radio-1/0]quit [Huawei-wlan-ap-1]quit [Huawei-wlan-view]vap-profile name vap1 [Huawei-wlan-vap-prof-vap1]auto-off service start-time 1:00:00 end-time 7:00:00 //Disable the VAP. Configuration on a Fat AP: [Huawei]wlan [Huawei] interface wlan-radio 0/0/0 [Huawei-Wlan-Radio0/0/0]radio disable//Disable the radio. [Huawei-Wlan-Radio0/0/0]quit [Huawei-wlan-view]vap-profile name vap1 [Huawei-wlan-vap-prof-vap1]auto-off service start-time 1:00:00 end-time 7:00:00//Disable the VAP.

Configure the WLAN password on AR routers
To configure the WLAN password on AR routers, you need to configure a security profile, and then invoke it in the service set. For details, see the configuration of WLAN authentication and encryption in the security policy in WLAN security configuration of AR routers. For example, use WPA2 authentication and encryption. For details, see "WLAN Security Configuration" in WLAN Security Configuration > Configuring a WLAN Security Policy.

How to configure channels and power for WLAN devices
Configure radio channels and power for WLAN devices manually or by configuring radio calibration. -Manual configuration Take the configuration on the AC as an example. Users can adjust the channel and power using the channel 20mhz xx and power-level commands. [AC6005-wlan-radio-0/0]display this # radio-profile id 0 channel 20MHz 13 power-level 2 # return Configure channels and power for Fat AP devices in the radio interface view.

Configuring hybrid interfaces on WLAN devices
The following example describes how to configure a hybrid interface on a WLAN device: - A hybrid interface can connect to either a user device or a switch. [HUAWEI]vlan 2 //Create a VLAN. [HUAWEI-vlan2]quit [HUAWEI]interface gigabitethernet0/0/2 [HUAWEI-GigabitEthernet0/0/2]port link-type hybrid //Set the interface type to hybrid. [HUAWEI-GigabitEthernet0/0/2]port hybrid untagged vlan 2 //Configure the interface to allow packets from VLAN 2 to pass through in untagged mode. [HUAWEI-GigabitEthernet0/0/2]port hybrid pvid vlan 2 //(Optional) Specify VLAN 2 as the default VLAN of the interface (default: VLAN 1). [HUAWEI-GigabitEthernet0/0/2]port hybrid tagged vlan 3 //Configure the interface to allow packets from VLAN 3 to pass through in tagged mode.

Example for configuring the WLAN service using WDS technology
The wireless distribution system (WDS) connects two or more wired or wireless LANs wirelessly to establish a large network to transmit data. For details, see Example for Configuring the WLAN Service Using WDS Technology.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top