How to upgrade the AC version on the CLI

22

Perform the following steps to upgrade an AC on the CLI: 
1. Upload the upgrade software to the AC using FTP, SFTP, or TFTP. 
2. Run the dir command in the user view to check whether the system software package is successfully uploaded.
     <Huawei> dir 
3. Run the startup system-software XXX command in the user view to configure the system software for the next startup.
     <Huawei> startup system-software AC6605V200R005C10.cc 
4. Run the display startup command to check whether the system software for the next startup is correct. 
    <Huawei> display startup 
5. Run the reboot command to restart the AC for loading the system software. 
    <Huawei> reboot  


For more information, see the upgrade guide in the appropriate version of an AC model.

Other related questions:
How to upgrade the AP version on the CLI
Perform the following operations to upgrade the AP version through the CLI: 1. Log in to an AP through the serial port or Telnet. 2. Run the display version command to check the AP version. 3. Run the save command to save the current configuration file of the AP, and back up the configuration file to a PC. 4. Save the upgrade software package in a server. 5. Run the upgrade version check command to verify the correctness of the upgrade assistant package. //For the AP8x30xN and AP9x30xN, you do not need to perform this operation. 6. Run the upgrade version ftp FatAP6X10XN_V200R005C10.bin 169.254.0.100 admin admin command to upgrade the AP. The system automatically restarts and implements the upgrade. For information on how to upgrade a Fat AP on the CLI, see the upgrade guide in the appropriate version of a Fat AP model. For information on how to upgrade a Fit AP on the CLI, see the upgrade guide in the appropriate version of a Fit AP model.

How to upgrade the AP version on an AC
Only Fit APs support version upgrade on the AC. Perform the following operations to upgrade a single AP on an AC: 1. Obtain the AP software package from Huawei official website, and upload it to the server. // In AC mode, upload the AP software package to an AC; in FTP or SFTP mode, upload the AP software package to an FTP or SFTP server. 2. Run the display ap all command on the AC to view information about the AP to be upgraded. 3. Run the ap-update load ap-id 1 update-filename FitAP6X10XN_V200R005C10.bin command in the WLAN view of the AC to upgrade the AP version. 4. Wait for the system to report the upgrade result. After the AP upgrade is complete, the upgrade result is displayed on the AC. 5. Run the ap-update reset ap-id 1 command in the WLAN view of the AC to reset the AP. For more information, see the upgrade guide in the appropriate version of a Fit AP model.

How to upgrade an AC through BootROM
Perform the following steps to upgrade an AC through BootROM: 1. Prepare the system software package to be upgraded and enable the TFTP server on a PC. 2. Connect the PC to the AC using a console cable and start a terminal emulator (such as SecureCRT and HyperTerminal) on the PC. 3. Power off and restart the AC. When the system displays the message "Press Ctrl+B to enter BOOTROM menu ...", press Ctrl+B to enter the BootROM menu (default password: admin@huawei.com). 4. Enter the file system submenu and check whether there is sufficient space in the storage medium on the AC to store the new system software package. 5. Enter the Ethernet submenu, set TFTP parameters as prompted, and download the system software package from the TFTP server. 6. Enter the startup submenu and specify the uploaded system software package as the system software for the next startup. 7. Restart the AC. For more information, see the upgrade guide in the appropriate version of an AC model.

How to upgrade IAD version software
IAD version of the software upgrade method is as follows: Step 1: the new version of the software on the FTP server and set up FTP sharing. Step 2: use the load command to load the version on IAD. Please refer to the corresponding version of the upgrade guide. Please pay attention to the details of the upgrade instructions before upgrading". If you restart after the upgrade, please refer to the guide for the "upgrade failure method" section. Please go to the following path to obtain the corresponding version of the upgrade Guide: http://support.huawei.com/enterprise/productNewOffering?idAbsPath=7881490|21781198|21781760|21460870|15259&pid=15259

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top