How to display all the ARP mapping entries ?

24

Check whether the AP has obtained an IP address based on the MAC address, and ping the IP address. display arp

Other related questions:
Aged ARP entry display on S series switches
On S series switches (except S1700 switches), aged ARP entries cannot be displayed. You can only view the current ARP table.

Can the MAC address in an ARP mapping entry be configured to a multicast MAC address for a static ARP mapping table
Versions earlier than V100R006 do not support the function of configuring the MAC address in an ARP mapping entry to a multicast MAC address for a static ARP mapping table. V100R006 and later versions support the function of configuring the MAC address in an ARP mapping entry to a multicast MAC address for a static ARP mapping table.

Delete ARP entries on S series switch
On an S series switch, except S1700, run the reset arp { all | dynamic [ ip ip-address [ vpn-instance vpn-instance-name ] ] | interface interface-type interface-number [ ip ip-address ] | static } command in the user view to delete ARP entries. The parameters are as follows: all: deletes all ARP entries. dynamic: deletes dynamic ARP entries. static: deletes static ARP entries. interface: deletes ARP entries on the specified interface. ip-address: deletes ARP entries of the specified IP address. vpn-instance: deletes ARP entries in the specified VPN instance. Run the undo arp static ip-address mac-address [ vpn-instance vpn-instance-name | [ vid vlan-id [ cevid ce-vid ] ] interface interface-type interface-number[.subinterface-number ] ] or undo arp static ip-address [ vpn-instance vpn-instance-name | vid vlan-id [ cevid ce-vid ] interface interface-type interface-number[.subinterface-number ] ] command in the system view to delete ARP entries.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top