How to turn off LED indicators of an AT

10

After an AT is powered on, run the led off command in the system view to turn off the AT indicators to save energy and minimize illumination impacts on environment.

Other related questions:
How to turn off LED indicators of an AP
After a Fit AP is powered on, log in to the AC and run the led off command in the AP system profile view to turn off all indicators on the Fit AP to save energy and minimize illumination impacts on environment. Indicators on a Fat AP cannot be turned off.

How to turn on and turn off the right of call transfer for the user registered with U19
Use the following command: Add right: config modify subscriber dn [subpbxno <0-251>] operatenewservice add newservicerights hookingtransfer Delete right: config modify subscriber dn [subpbxno <0-251>] operatenewservice del newservicerights hookingtransfer NOTE: dn is user number; subpbx can be queried by using command: show subscriber dn

How can I turn off the DP300 display?
Tap the power button in the lower right corner of the display and choose to turn off the display, exit the videoconferencing system, or restart the videoconferencing system as prompted.

Powering off a rack server
Set a rack server to Standby state: -Use the KVM to shut down the server OS. -Press down the power button on the front panel of the server. -On the iBMC CLI, run the ipmcset -d powerstate -v 0 command. -On the iBMC WebUI, choose Power > Power Control, and click the Power Off button. Power off a rack server completely: Set the rack to the Standby state, and remove the power cable from the server.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top