Method of creating a VLAN through the web NMS on an AR router

28

The web NMS of the AR series routers does not support VLAN creation or adding of interfaces to a created VLAN.
You can create a VLANIF interface, and add the interface to the VLAN.
1. Choose LAN Access > LAN >VLAN Interface to enter the VLAN interface configuration page.
2. In the VLAN Interface List area, click Create.
3. On the Create VLAN Inter page, select parameters or enter values according to requirements to configure a VLAN interface.
On the NMS page, only interfaces of the access and trunk types can be configured. Hybrid type interfaces cannot be configured.
Use command lines to create a VLAN.
In the system view, run the vlan command or the vlan batch command.

Other related questions:
Method of adding interfaces to a VLAN through the web NMS on an AR router
The web NMS of the AR series routers does not support VLAN creation or adding of interfaces to a created VLAN. You can create a VLANIF interface, and add the interface to the VLAN. Method of adding interfaces to a VLAN through the web NMS on an AR router, select parameters or enter values according to requirements to configure a VLAN interface. On the NMS page, only interfaces of the access and trunk types can be configured. Hybrid type interfaces cannot be configured. Use the following command lines to add an interface to a VLAN: - Access interface # interface Ethernet2/0/0 port link-type access port default vlan 100 # - Trunk interface # interface Ethernet2/0/0 port link-type trunk port trunk allow-pass vlan 100 to 200 # - Hybrid interface # interface Ethernet2/0/0 port hybrid tagged vlan 100 to 200 (or port hybrid untagged vlan 100 to 200) #

Method of configuring Telnet through the web NMS on an AR router
The method of configuring Telnet through the web NMS on an AR router is as follows: I. Enable the Telnet service. 1. Log in to the web NMS, and choose System Management > System Configuration > Service Management to enter the service management page. 2. Select Enabled of Telnet Service to enable the Telnet service. 3. Click Apply. II. Configure an account and a password for Telnet login. 1. Choose User Management > User Management. 2. Click the modify icon to change the default user admin and configure Telnet as an access type. Alternatively, click Create User to create an administrator account for Telnet login, configure a user name and a password, and select Telnet for Access type. 3. Click OK.

How to enable the web function on an AR router
The methods of enabling the web function on an AR router are as follows: Method 1: Default web login 1. Connect a PC to the router over the management interface through a network cable. 2. Configure an IP address for the PC. Configurable network segment: 192.168.1.2~192.168.1.254. 3. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page. 4. Enter login information. 5. Configure the router through the web NMS page. Note: If you cannot enter the web NMS page, the software version you use does not support the default web login method. Please try the following method: Method 2: Non-default web login 1. Connect a PC to the router over the CON/AUX interface through a console configuration cable. 2. Enable the terminal emulation software on the PC, create a connection, and set an interface for the connection and other communication parameters. 3. Press Enter until the following information is displayed to remind users of configuring a verification code. 4. Connect a PC to the router over the management interface through a network cable. 5. Configure an IP address for the router for management. 6. Enable the web service. 7. Configure an HTTPS user and a user level. 8. Configure an IP address for the PC. 9. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page. 10. Configure the router through the web NMS page.

How to query routing information through the web NMS on an AR router
To query routing information, do as follows: 1. Choose IP Service > Route > Routing Table on the web page. 2. You can query all routing tables, or select a routing type or destination IP address/subnet mask to query specified routes, depending on actual needs.

Configure a blacklist of an AR router
A blacklist can be manually configured. After the address scan and port scan functions of the attack defense module are enabled on an AR router, an IP address (or an interface) for which the packet rate exceeds a set value can be automatically added into a blacklist to shield packets sent from this IP address (or through this interface) as the router considers the rate excess as a scan attack. To configure a blacklist, do as follows: Run the system-view command to access the system view. [Huawei] firewall blacklist enable //Enable the blacklist function. By default, the blacklist function is not enabled. Blacklist entries can be added one by one or in batches. [Huawei] firewall blacklist ip-address [ vpn-instance vpn-instance-name ] [ expire-time minutes ] //Add blacklist entries one by one. Note: Blacklist entries without specified aging time will be written into a configuration file, while those with specified aging time will not. Run the display firewall blacklist command to check the blacklist entries without specified aging time. [Huawei] firewall black-white-list load configuration-file configuration-file-name //Load the configuration file of the blacklist/whitelist. Note: By loading the configuration file of the blacklist/whitelist, blacklist entries can be configured in batches. This configuration file must be configured in advance, and it supports only the text format. For details about how to configure the blacklist function of AR series routers using command lines and through the web NMS, see the URL: AR router configuration blacklist.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top