Is the antenna gain determined in factory settings

20

The gain is a fixed attribute of an antenna and cannot be adjusted.

Other related questions:
Is the antenna gain determined during production? Can the antenna gain be adjusted
No, the gain is a fixed attribute of an antenna and cannot be adjusted.

Determining the orientation of an antenna
Determine the orientation of an antenna based on the site condition. In most cases, good signal coverage can be obtained if antennas are placed with a correct polarization direction. From the signal radiation figure of an AP's omnidirectional antenna, you can see that the antenna gain is the highest in the direction vertical to the antenna. When an AP is placed horizontally or wall-mounted, the main lobe of an antenna should be vertical to the coverage area to achieve the best signal coverage.

Restore factory settings of the S1700
Restore factory settings of the S1700 using either of the following methods: 1. Hold down the Reset button. When you hold down the Reset button for more than 5s, the switch restarts and restores the factory settings. (If you forget the changed management IP address or password of a switch, you can hold down the Reset button to restore factory settings of the switch.) 2. Restore the factory settings through the web. a. Choose System Management > Reset Factory. b. Click Reset Factory. c. Click Apply.

Restore factory settings
You can run the reset saved-configuration command in the user view to delete the configuration file for the next startup, so that the switch restarts with the default factory settings. # Delete the configuration file for the next startup. reset saved-configuration The action will delete the saved configuration on the device. The configuration will be erased to reconfigure.Continue? [Y/N]: y Warning: Now clearing the configuration in the device. Info: Succeeded in clearing the configuration in the device. reboot slot 1: Next startup system software: flash:/basicsoftware.cc Next startup saved-configuration file: NULL Next startup paf file: default Next startup patch package: NULL Warning: The current configuration will be saved to the next startup saved-confi guration file. Continue? [Y/N]: n Warning: The system will reboot. Continue? [Y/N]: y

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top