How can I separate two STAs that connect to the same AP and SSID

26

Huawei APs support Layer 2 isolation. When Layer 2 isolation is enabled, STAs cannot communicate at Layer 2. Only the upstream interface and virtual access point (VAP) interface can exchange data. You can enable Layer 2 isolation on an AC.

Other related questions:
How to isolate STAs associated with the same SSID of an AP
Huawei APs support local Layer 2 isolation. After Layer 2 isolation is enabled, local STAs cannot communicate at Layer 2, and data can only be transmitted between uplink ports and VAP ports. To enable Layer 2 isolation, configure it on an AC.

Sort SSIDs on STAs
The sorting of SSIDs is completed by STAs. APs cannot specify the SSID sorting.

Can SSIDs of WLANs be the same
You can configure the same SSID, but STAs usually identify it as the same network.

Does an AP configured with multiple SSIDs support the same number of access users as an AP configured with one SSID
Yes. An AP configured with multiple SSIDs supports the same number of access users as an AP configured with one SSID.

Why does the SSID of an AP disappear intermittently on a STA when the AP is running normally
Possible causes are: -Automatic channel adjustment is enabled on the AP, so the AP continuously adjust channels to obtain the best radio performance. The radio module of the AP is reset when the channel is changed. You can run the channel-mode fixed command in the radio profile view to solve this problem. -The STA is far from the AP or is blocked by an obstacle. As a result, the receive signal strength on the STA is weak.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top