Method used to configure licenses of OptiX OSN 8800

4

OptiX OSN 8800 licenses, such as universal line board license, TP-Assist license, and the license for OptiX OSN 8800 T32 universal subrack, need to be configured on the U2000. The procedure is as follows:

1. In the main topology, choose Configuration > NE Batch Configuration > NE License Authorization. The Choose License window is displayed.

2. In the Choose License window, select the license to be loaded and click OK. The NE License Authorization window is displayed.

3. On the left side of the NE License Authorization window, select the desired NE from the navigation tree.

4. On the right side of the window, set the license.

Other related questions:
Method used to configure IEEE 1588v2 clocks for OptiX OSN 8800
For details about how to configure the IEEE 1588v2 clocks for OptiX OSN 8800, you can refer to the product documentation.

Method used to configure physical-layer clocks for OptiX OSN 8800
For details about How do I configure physical-layer clocks for OptiX OSN 8800, you can refer to the product documentation.

Method used to query the wavelength information of a line board in the OptiX OSN 8800
1. You can query the wavelength information of a line board on the Advanced Attributes tab in the WDM Interface window. 2. You can also query the wavelength information of a line board based on Board Manufacturer Information of its optical module.

Methods for adding slave subracks on an OptiX OSN 8800 device
Run the :cfg-add-shelf:1,shelf6800 command to add a slave subrack.

Licenses for OptiX OSN 3800
A license granted by Huawei permits a customer to use the licensed product within a specific use scope and for a specific duration. The customer can also obtain the services committed by Huawei. When the SOM feature is configured, valid feature licenses on the NE must have been obtained.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top