Whether the PND2 board can work with the EX2 board

3

No, they cannot.

Other related questions:
OSC boards that can work together with the SFIU board
The OSC board that works with the SFIU board must be ST2, because the ST2 board supports either the 1511 nm or 1494 nm pluggable optical module. When the ST2 board works with the SFIU board, the operating wavelength of its RM1/TM1 port is 1511 nm and that of its RM2/TM2 port is 1491 nm. The SFIU board converges these two monitoring signals so that they can be transmitted over one optical fiber, implementing the commissioning-free and compensation-free functions defined in IEEE 1588v2.

Interface boards that an EFT8 board on an OSN 3500 can work with
An EFT8 board on an OSN 3500 can work with the following types of interface boards: 1. Works with two ETF8 boards to receive and transmit Ethernet signals over 16 electrical ports. 2. Works with an EFF8 board to receive and transmit 8 channels of Ethernet optical signals and 8 channels of Ethernet electrical signals.

Interface boards that an EGS2 board on an OSN 3500 can work with
An EGS2 board on an OSN 3500 provides two GE service ports on its panel, and therefore cannot work with an interface board.

Interface boards that an EMS2 board on an OSN 3500 can work with
An EMS2 board on an OSN 3500 can work with the following types of interface boards: 1. Works with two ETF8 boards to receive and transmit FE signals over 16 electrical ports. 2. Works with two EFF8 boards to receive and transmit FE signals over 16 optical ports. 3. Works with an ETF8 board to receive and transmit FE signals over 8 electrical ports, or works with an EFF8 board to receive and transmit FE signals over 8 optical ports.

Whether LOG boards can work with OLP boards to form protection between different channels
Yes. LOG boards can work with OLP boards to form extended intra-board 1+1 protection or client 1+1 protection.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top