Whether ports on the TN11LOA board of OptiX OSN 8800 can be configured in different working modes

7

Yes. The TN11LOA board of OptiX OSN 8800 supports hybrid transmission of any services except FC800/FICON8G/Infiniband 5G services. The total bandwidth for hybrid transmission cannot exceed 10 Gbit/s.

Other related questions:
Differences between the speedup mode and standard mode of the line board of OptiX OSN 8800
The rate in speedup mode is 11.1G and the service type is 10GE LAN. The service type is 10GE WAN in standard mode. When the speedup mode is used, the line boards need to be set to the speedup mode.

Whether the 53ND2 board can substitute for the 12ND2 board on OptiX OSN 8800
The 53ND2 board can substitute for the 12ND2 board but cannot substitute for the 11ND2 board.

Whether OptiX OSN 8800 supports 10G boards
Yes. 10G OTU boards, tributary boards, and line boards are all available in OptiX OSN 8800.

Methods for modifying the port working mode of OptiX OSN 6800 and OptiX OSN 1800
If the queried configuration service type is GE (GFP-T), the working mode does not need to be configured, and switches at both ends must be in the same working mode.

Whether NS4 boards in the OptiX OSN 8800 platform subracks support the regeneration mode
TN54NS4: On the OptiX OSN 8800 T64, OptiX OSN 8800 T32, and OptiX OSN 8800 universal platforms, NS4 boards support only the regeneration mode. TN56NS4: On OptiX OSN 8800 T64 and OptiX OSN 8800 universal platforms, NS4 boards support only the regeneration mode.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top