Whether an NE equipped with SFIU+ST2 be interconnected with an NE equipped with FIU+SC2

5

No, they cannot. An NE equipped with SFIU+ST2 can be interconnected only with an NE that has the same configuration.

Other related questions:
Whether SFIU can work with SC2
No, SFIU cannot work with SC2. The OSC board that can work with the SFIU board must be ST2.

Whether an ST2 board and SC2 board can be interconnected on an OSN 6800
It is not recommended that ST2 and SC2 boards be interconnected because they have different rates and encoding formats (CIM used by the SC2 board and FEC used by the ST2 board). SC1 and SC2 boards use the same rate and encoding format, and therefore can be interconnected.

Method used to clear the NE database of the system control board in OTN equipment
Set the jumper on the system control board to 1011.

Whether the ST2 board and the SC2 board can be interconnected on OptiX OSN 6800
It is not recommended that the ST2 and SC2 boards be interconnected because they have different rates and encoding formats (CIM used by the SC2 board and FEC used by the ST2 board). The SC1 and SC2 boards use the same rate and encoding format and therefore can be interconnected.

Cooperation between ST2 and SFIU
An SFIU board multiplexes the main path signals and OSC signals into a single communications channel, and demultiplexes these signals. The OSC board that can work with the SFIU board can only be ST2. The SFIU board sends OSC signals to the ST2 board through the OSC1 optical port and receives OSC signals from the ST2 board through the OSC2 optical port.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top