Requirement for cross-connect boards when the TQX board is used to transmit STM-64 services

18

No.

Other related questions:
OSN 8800 boards that can transmit STM-64 signals
TDX or TQX.

Whether NS3 board resources can be shared between STM-64 and 10GE LAN services on the TQX and NS3 boards
Yes. The STM-64 and 10GE LAN services provisioned on the TQX and NS3 boards of OTN equipment can share the same resources of the NS3 board. The ODU3 services need to be in speedup mode and ODU2 service mode need to be set according to the actual service type.

Requirements for cross-connect boards and system control boards when packet service boards are used in OptiX OSN 8800
For an OptiX OSN 8800 T32 subrack, the cross-connect boards must be TN52UXCH or TN52UXCM and the system control boards must be TN52SCC if packet service boards are used. For an OptiX OSN 8800 T16 subrack, the cross-connect boards must be TN16UXCM if packet service boards are used.

Requirement for a WDM board to receive STM-4 services and service boards supporting STM-4 services
To receive STM-4 services, the WDM board must support STM-4 services. The following service boards support STM-4 services: LDM, LQM, TOA, THA, TOM, TQM, and LOA.

Whether an OSN 1800 has boards that support STM-64 services
The LSX and LDX boards on an OSN 1800 support STM-64 services.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top