Cross-connect capacity of each slot in an OptiX OSN 6800 subrack

5

If the TN12XCS board is used, each of the IU1, IU4, IU11, and IU14 slots supports a maximum cross-connect capacity of 40 Gbit/s. Each of the other service slots supports a maximum cross-connect capacity of 20 Gbit/s.
If the TN11XCS board is used, each of all service slots supports a maximum cross-connect capacity of 20 Gbit/s.
When IU17 is used as a service slot, no service grooming is supported.

Other related questions:
Service capacity of each slot in an OptiX OSN 6800 subrack equipped with the NQ2 board
If the TN12XCS board is used, the NQ2 board supports a service capacity of 40 Gbit/s when it is installed in slot 1, 4, 11, or 14; the NQ2 board supports a service capacity of 20 Gbit/s when it is installed in any of other slots and only optical ports IN1/OUT1 and IN2/OUT2 of the board are available. If the TN11XCS board is used, only optical ports IN1/OUT1 and IN2/OUT2 of the NQ2 board are available and therefore the board supports a service capacity of only 20 Gbit/s regardless of the slot housing the board.

Service capacity of each slot in an OptiX OSN 6800 subrack equipped with the TQX board
If the TN12XCS board is used, the TQX board supports a service capacity of 40 Gbit/s when it is installed in slot 1, 4, 11, or 14; the TQX board supports a service capacity of 20 Gbit/s when it is installed in any of other slots and only optical ports RX1/TX1 and RX2/TX2 of the board are available. If the TN11XCS board is used, only optical ports RX1/TX1 and RX2/TX2 of the TQX board are available and therefore the board supports a service capacity of only 20 Gbit/s regardless of the slot housing the board.

OptiX OSN 1500B slot connection capacity
If OptiX OSN 1500 a configuration on the master cross board for Q2CXL, Q3CXL and Q5CXL series veneer, is: When used as a big plate, slot 12 and slot 13 access capacity of 2.5 Gbit/s. When used as a small plate, four small plate a access capacity of 1.25 Gbit/s. If OptiX OSN 1500 a configuration on the master cross board for R1CXL and veneer R2CXL series, are: When used as a big plate, slot 12 access capacity of 1.875 Gbit/s, slot 13 access capacity of 1.25 Gbit/s. When used as a small plate, only slot 2, put single slot 12 and 13 can plug slot.Slot 2 access capacity of 622 mbit/s, slot 12 and slot 13 access capacity of 1.25 Gbit/s. If OptiX OSN 1500 b on the configuration of master cross board for Q2CXL, Q3CXL and Q5CXL series veneer, is: When used as a big plate, slot 11, 12 and slot slot 13 access capacity of 2.5 Gbit/s. When used as a small plate, slot 1 ~ 3 and slot 11 ~ 13 access capacity of 1.25 Gbit/s. Description: When using Q5CXL series veneer, in Lao tze rack, slot 6 ~ 9 access capacity are 622 mbit/s;In the new child frame, slot 6 ~ 9 access capacity of 1.25 Gbit/s. If OptiX OSN 1500 b on the configuration of master cross board for R1CXL and veneer R2CXL series, are: When used as a big plate, slot 11 access capacity of 622 mbit/s, slot 12 and slot 13 access capacity of 1.25 Gbit/s. When used as a small plate, slot only 11 ~ 13 can plug put veneer, access capacity and as a big board when using the same.

Slots for holding TDX boards in an OptiX OSN 6800 subrack
In an OptiX OSN 6800 subrack, a TDX board can be installed in any slots of IU1 to IU17.

Whether an OptiX OSN 8800 subrack can function as a slave subrack of an OptiX OSN 6800 subrack
Yes, it can function as a slave subrack of an OptiX OSN 6800 subrack.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top