Jumper setting on TN11SCC in the OptiX OSN 6800 to enable batteries to supply power


To use batteries to supply power, short circuit pins 2 and 3; otherwise, short circuit pins 1 and 2.

Other related questions:
Power supply requirements of the OSN 6800 subracks
Standard operating voltage: �?8 V to �?0 V DC Operating voltage range: �?8 V DC: �?0 V to �?7.6 V �?0 V DC: �?8 V to �?2 V Rated current (�?8 V): 25 A

OptiX OSN 6800
The OptiX OSN 6800 intelligent optical transport platform (OptiX OSN 6800 for short) is a new-generation intelligent optical transport platform of Huawei. The OptiX OSN 6800 is a future-oriented product developed to address the trend towards IP-based long-haul backbone networks. It provides dynamic optical scheduling and flexible electrical scheduling. It features high integration and reliability, and supports multi-service transmission. OptiX OSN 6800 is applicable to longhaul backbone networks, regional backbone networks, local networks, the metro convergence layer, and the metro core layer.

Method used to set the jumpers on the TN11AUX02 board of the OSN 6800
The J16, J15, J4, J3, and J2 jumpers can be set in 32 combinations, representing decimal values 0-31. The default setting of the five jumpers is 00000. The value 0 indicates the master subrack and the other values indicate slave subracks.

Maximum power consumption of an OptiX OSN 6800 subrack
The maximum power consumption of an OptiX OSN 6800 subrack is 1350 W.

Licenses for OptiX OSN 6800
A license granted by Huawei permits a customer to use the licensed product within a specific use scope and for a specific duration. The customer can also obtain the services committed by Huawei. When the IEEE 1588v2 or ASON feature is configured, valid feature licenses on the NE must have been obtained.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top