Configuration modifications required for a type change from 10GE LAN to STM-64 for services from TDX to NQ2

3

You need to change the service type from 10GE LAN to STM-64 for the related client-side optical port of the TDX board, and change the line rate from speedup mode to standard mode for the NQ2 board.

Other related questions:
Whether timeslots are required for mapping STM-64 and 10GE LAN services to ODUk signals
The STM-64 and 10GE LAN services are mapped to ODUk signals in standard mapping mode which does not require timeslots.

Line-side settings for changing the tributary service type from 10GE LAN to 10GE WAN on an OSN 8800
When the tributary service type of an OSN 8800 is changed from 10GE LAN to 10GE WAN, the line rates of the related channels on line boards must be changed to standard mode.

Line settings for changing the tributary service type from 10GE LAN to 10GE WAN on OSN 8800
When the tributary service type of OSN 8800 is changed from 10GE LAN to 10GE WAN, the line rates of the related channels on line boards must be changed to standard mode.

Whether a port whose service type is set to STM-64 can receive 10GE WAN services
A port whose service type is set to STM-64 can receive 10GE WAN services. To receive 10GE WAN services, however, you are advised to set the port service type to 10GE WAN.

Whether an OSN 1800 has boards that support STM-64 services
The LSX and LDX boards on an OSN 1800 support STM-64 services.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top