Whether OSN 8800 devices and PTN devices can form a LAG group

0

No, different types of devices cannot form a LAG group.

Other related questions:
Whether the ST2 boards intended for OSN 8800 devices can be installed in OSN 6800 subracks
The ST2 boards intended for OSN 8800 devices can be installed in OSN 6800 subracks. To use the clock function of the ST2 boards, the ST2 boards must be installed in subracks that are equipped with clock boards.

Whether OBU103 can temporarily substitute OAU101
The two boards cannot be directly substituted. If OBU103 needs to be inserted to another slot for substitution, the optical power must be adjusted because the gain and single-wavelength nominal values of the two boards are different.

Whether NE alarm tones and indicators can be set on OSN 8800 devices
You can press the ALMCUT button on a system control board to clear the alarm tones, but the board indicators cannot be cleared.

Whether the optical supervisory channel (OSC) mode and the electrical supervisory channel (ESC) mode of OSN 8800 devices can be used together
You are not advised to use the OSC and ESC modes together. You can disable the ESC mode through the GCC0 channel on an optical board.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top