Constraints on loopbacks of the TN53NS2 board

2

A loopback on the TN53NS2 board can apply only to service granularities received from the backplane side. For example, ODU0 granularities received from the backplane side can be looped back, but ODU1 granularities multiplexed from ODU0 granularities cannot be looped back on the TN53NS2 board.

Other related questions:
Constraints on loopbacks of the TN53ND2 board
A loopback on the TN53ND2 board can apply only to service granularities received from the backplane side. For example, ODU0 granularities received from the backplane side can be looped back, but ODU1 granularities multiplexed from ODU0 granularities cannot be looped back on the TN53ND2 board.

Constraints on loopbacks of the TN53NQ2 board
A loopback on the TN53NQ2 board can apply only to service granularities received from the backplane side. For example, ODU0 granularities received from the backplane side can be looped back, but ODU1 granularities multiplexed from ODU0 granularities cannot be looped back on the TN53NQ2 board.

Method used to release a board loopback
On the NMS, when the Auto Disabling parameter is set to Disabled for a board loopback, the loopback will be released within the configured Auto Disabling Time. If the automatic release function is disabled, release the loopback on the NMS.

Whether an OSN 8800 T16 subrack can house a TN53NS2 board
Yes, an OSN 8800 T16 subrack can house a TN53NS2 board.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top