Method used to set the line rate of the ND2 board when the client-side service type of the TQX board is 10GE LAN in bit transparent mapping (11.1G) mode

3

Set the line rate to speedup mode for the ND2 board.

Other related questions:
Method used to set the line rate of the ND2 board when the client-side service type of the TDX board is 10GE LAN in bit transparent mapping (11.1G) mode
Set the line rate to speedup mode for the ND2 board.

Difference between client-side 10GE LAN and 10GE WAN services on the TQX board
Both 10GE LAN and 10GE WAN services are Ethernet services but have different service rates. The rate of 10GE LAN services is 10.31 Gbit/s and that of 10GE WAN services is 9.95 Gbit/s. Set the client-side service type of the TQX board based on the actual rate of received services.

Client-side service type for OTN service boards when 10GE WAN services are received
When 10GE WAN services are received, the client-side service type for OTN service boards must be 10GE WAN or STM-64.

Method used to handle the failure to set the port mapping mode to 11.1G and the error message indicating that the command is unsupported (error code: 38737) when the service type is set to 10GE LAN for the TN54TTX board
The TTX board supports only one port service mapping path. You do not need to set it to bit transparent mapping (11.1G).

Line-side settings for changing the tributary service type from 10GE LAN to 10GE WAN on an OSN 8800
When the tributary service type of an OSN 8800 is changed from 10GE LAN to 10GE WAN, the line rates of the related channels on line boards must be changed to standard mode.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top