Types of fibers used to connect the HBA board

One multiplexed optical signal received at the IN port is sent to the EDFA optical module. The EDFA optical module amplifies the optical power of the signal and locks the gain of the signal. The signal is then transmitted to the DCM board through the TDC port for dispersion compensation. Then, the signal is sent back through the RDC port. The amplified multiplexed signals are output through the OUT port. The multiplexed signal can also be input through the VI port and output through the VO port after the optical power is adjusted. Then, the IN port receives the multiplexed signal sent from the VO port.

The fiber connections for SFIU boards vary depending on their positions on the NEs and networks.

Each port on the SFIU board supports bidirectional transmission. It can receive or transmit a signal depending on the position of the SFIU board. The optical ports LINE1, LINE2, SYS1, and SYS2 can be used to transmit or receive signals on the main optical path.

One multiplexed optical signal received at the IN port is sent to the EDFA optical module. The EDFA optical module amplifies the optical power of the signal and locks the gain of the signal. The signal is then transmitted to the DCM board through the TDC port for dispersion compensation. Then, the signal is sent back through the RDC port. The amplified multiplexed signals are output through the OUT port. The multiplexed signal can also be input through the VI port and output through the VO port after the optical power is adjusted. Then, the IN port receives the multiplexed signal sent from the VO port.

No. The HBA board must be used together with the TN13FIU02 board.