Precautions for provisioning 10GE services on the TQX board

3

Appropriately select service types and line board service modes.

Other related questions:
Whether NS3 board resources can be shared between STM-64 and 10GE LAN services on the TQX and NS3 boards
Yes. The STM-64 and 10GE LAN services provisioned on the TQX and NS3 boards of OTN equipment can share the same resources of the NS3 board. The ODU3 services need to be in speedup mode and ODU2 service mode need to be set according to the actual service type.

Difference between client-side 10GE LAN and 10GE WAN services on the TQX board
Both 10GE LAN and 10GE WAN services are Ethernet services but have different service rates. The rate of 10GE LAN services is 10.31 Gbit/s and that of 10GE WAN services is 9.95 Gbit/s. Set the client-side service type of the TQX board based on the actual rate of received services.

Whether 10GE services can be provisioned between LSX and ND2
LSX is an OTU board, while ND2 is an OTN line board. An OTU board cannot be interconnected with an OTN line board. Therefore, 10GE services cannot be provisioned between them.

Line settings for changing the tributary service type from 10GE LAN to 10GE WAN on OSN 8800
When the tributary service type of OSN 8800 is changed from 10GE LAN to 10GE WAN, the line rates of the related channels on line boards must be changed to standard mode.

Line-side settings for changing the tributary service type from 10GE LAN to 10GE WAN on an OSN 8800
When the tributary service type of an OSN 8800 is changed from 10GE LAN to 10GE WAN, the line rates of the related channels on line boards must be changed to standard mode.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top