Whether the HUNQ2 board supports ODUk SNCP

9

The HUNQ2 board supports ODUk SNCP in most scenarios, but does not support ODUk SNCP or ODUk SPRing protection when the board receives SDH or packet services from the backplane.

Other related questions:
Precautions for selecting the SNCP type during ODUk SNCP configuration
When configuring ODUk SNCP protection, you are advised to set the SNCP type to SNC/N to enable non-intrusive monitoring on both the source and sink ends of the protection group. This setting facilitates network monitoring. In cascading or nested protection scenarios, however, you are advised to set the SNCP type to SNC/S.

ODUk SNCP service configuration procedure
ODUk SNCP service creation by trail: (1) Configure TCM overheads of the line board. (2) Set board parameters. (3) Create a client trail. (4) Create ODUk SNCP protection. (5) Check ODUk SNCP protection status. ODUk SNCP service creation by single site: 1. Configure ODUk SNCP protection at the transmit site. (1) Configure OTN overheads of the line board. (2) Set board parameters. (3) Create ODUk SNCP protection. 2. (Optional) Configure an electrical regeneration site. (1) Set board parameters. (2) Create bidirectional electrical cross-connection services. 3. Configure ODUk SNCP protection of the receive site. 4. Check ODUk SNCP protection status.

Trigger conditions of ODUk SNCP switching
The conditions for triggering automatic ODUk SNCP switching are as follows: The board cannot be detected (for example, the board is removed or undergoes a cold reset). There are board alarms indicating SF and SD.

Procedure for configuring ODUk SNCP services
The procedure for configuring ODUk SNCP services is as follows: 1. Determine the type of the ODUk SNCP to be configured. 2. Configure the OTN overheads for line boards. 3. Create an SNCP service.

Switching time of ODUk SNCP protection
The switching time of ODUk SNCP protection cannot exceed 50 ms, excluding the detection time.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top