Standards compliance of 100GE services

10

100GE services comply with IEEE 802.3ba.

Other related questions:
Standards compliance of the OSN 9800
The OSN 9800 complies with various standards.

Standards compliance of the OSN 8800
The OSN 8800 complies with various standards.

How do I configure a 3G interface on an AR router
When WCDMA is used, the procedure for configuring a 3G interface is as follows: [Huawei] apn profile 3gprofile //Create an APN profile. [Huawei-apn-profile-3gprofile] apn 3GNET [Huawei-apn-profile-3gprofile] user name 3guser password cipher Password@123 authentication-mode auto [Huawei-apn-profile-3gprofile] quit [Huawei] dialer-rule //Configure a dialer ACL. [Huawei-dialer-rule] dialer-rule 1 ip permit [Huawei-dialer-rule] quit [Huawei] interface cellular 0/0/0 [Huawei-Cellular0/0/0] link-protocol ppp [Huawei-Cellular0/0/0] ip address ppp-negotiate //Configure an IP address through PPP negotiation. [Huawei-Cellular0/0/0] ppp ipcp dns request //Configure a DNS server address through PPP negotiation. [Huawei-Cellular0/0/0] dialer enable-circular //Enable C-DCC. [Huawei-Cellular0/0/0] dialer-group 1 //Associate Cellular0/0/0 to the dialer access group. [Huawei-Cellular0/0/0] dialer number *99# //Configure a dialer number for calling the remote end. [Huawei-Cellular0/0/0] mode wcdma wcdma-precedence //Configure a network connection mode. [Huawei-Cellular0/0/0] apn-profile 3gprofile //Bind the APN profile to the 3G cellular interface. [Huawei-Cellular0/0/0] shutdown [Huawei-Cellular0/0/0] undo shutdown [Huawei-Cellular0/0/0] quit When CDMA2000 is used, the procedure for configuring a 3G interface is as follows: [Huawei] dialer-rule //Configure a dialer ACL. [Huawei-dialer-rule] dialer-rule 1 ip permit [Huawei-dialer-rule] quit [Huawei] interface cellular 0/0/0 [Huawei-Cellular0/0/0] link-protocol ppp [Huawei-Cellular0/0/0] ip address ppp-negotiate //Configure an IP address through PPP negotiation. [Huawei-Cellular0/0/0] ppp ipcp dns request //Configure a DNS server address through PPP negotiation. [Huawei-Cellular0/0/0] dialer enable-circular //Enable C-DCC. [Huawei-Cellular0/0/0] dialer-group 1 //Associate Cellular0/0/0 to the dialer access group. [Huawei-Cellular0/0/0] dialer number #777 //Configure a dialer number for calling the remote end. [Huawei-Cellular0/0/0] mode cdma hybrid //Configure a network reconnection mode. [Huawei-Cellular0/0/0] quit

What does RFC 1583 compliance mean
The rfc1583 compatible command is used to enable a device to support the route selection rules defined in RFC 1583. After the undo rfc1583 compatible command is run: If there are two paths from a device to an ASBR, of which one is within a backbone area and the other is within a non-backbone area, the path within non-backbone areas will be selected. If the paths from a device to an ASBR are all within non-backbone areas, the device first compares the costs of the paths. If the costs are the same, the device will select the path within the non-backbone area with a larger Area ID. If there are two paths from a device to an ASBR, of which one is an inter-area path that passes through the backbone area, and the other is a path within a non-backbone area, the device first compares the costs of the paths. If the costs of the paths are the same, the device will select the path that passes through the area with a larger Area ID. (The ID of the backbone area is 0, and therefore the inter-area path that passes through the backbone area will not be preferred.) By default, a device support the route selection rules defined in RFC 1583. (Route selection rules defined in RFC 1583: Route costs are compared first. If route costs are the same, the route that passes through an area with a larger Area ID is selected.)

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top