Service encapsulation modes supported by the TN52TOG board


The TN52TOG board can encapsulate GE services into GE(TTT-GMP) or GE (GFP-T) services.

Other related questions:
Support for OTN encapsulation by the LWXD board
The LWX2, LWXS, and LWXD boards do not support OTN encapsulation. These boards implement only wavelength conversion. The service types on the WDM side and client side of the boards are the same. The service processing module on the boards performs only regeneration of client-side signals, and performance monitoring of SDH and GE services.

Advantages of the TTT-GMP and GFP-T encapsulation modes for GE services
The TTT-GMP encapsulation mode can better support synchronous Ethernet, and GFP-T can transparently transmit data packets with low latency.

Whether ports on the TN52TOG boards support autonegotiation
TN52TOG boards support only the 1000M full-duplex mode but not the autonegotiation mode.

Whether ODU0 services can be configured on the TN52TOG boards on OSN 6800 devices
OSN 6800 devices do not support ODU0 cross-connections.

Encapsulation modes for encapsulating packet services into ODUk signals on the HUNQ2 board
Both the GFP-F and GFP-T modes can be used to encapsulate packet services on the HUNQ2 board into ODUk signals. The GFP-T mode is used to encapsulate services into ODU0 signals only.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top