Whether the TN52TDX board supports ODU1 cross-connections

11

The TN52TDX board supports only ODU2 cross-connections.

Other related questions:
ODU1 cross-connections failing to be created on the TN52TOM board of OSN 6800 where no cross-connection is configured
The TN52TOM board does not support distributed ODU1 cross-connections.

Cause for the failure to create ODU1 cross-connections on TN52TOM boards on OSN 6800 (without cross-connect boards)
The TN52TOM board does not support distributed ODU1 cross-connections.

Whether two GE services on two TOM boards can be cross-connected to the same ODU1 timeslot on an ND2 board
The cross-connections between the TOM and ND2 boards are ODU1 cross-connections, which occupy the entire ODU1 timeslot. Therefore, two GE services on two TOM boards cannot be cross-connected to the same ODU1 timeslot of an ND2 board.

Whether the TN52TDX board support physical-layer clocks
The TN52TDX board supports the transparent transmission of synchronous Ethernet (physical-layer clocks) when receiving 10GE LAN services in the Bit Transparent Mapping (11.1 G) mode.

Whether the HUNQ2 board of OSN 1800 supports the ODU0 cross-connections
The HUNQ2 board supports ODU0 cross-connections, and can cooperate with cross-connect boards to implement grooming for 32 x ODU0 services.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top