OSN 8800 boards that support the coherent feature

10

The following OSN 8800 boards support the coherent feature:
Wavelength conversion boards: TN12LSC, TN14LSC, TN11LTX, TN12LTX, TN15LSXL
Line boards: TN55NS3, TN56NS3, TN54NS4, TN56NS4
Universal line board: TN54HUNS3

Other related questions:
Signal flow on the ITL boards of OSN 8800 devices
The ITL board is used to multiplex and demultiplex odd and even wavelengths. The wavelengths from the RO and RE ports are multiplexed into one wavelength and then sent out through the OUT port. The wavelength from the IN port is demultiplexed as two wavelengths and sent out through the TO and TE ports separately.

OSN 8800 boards that support IEEE 1588v2
If external phase source access is used, the following boards support IEEE 1588v2: 1PPS+TOD time access: TN16XCH, TN16UXCM, TN52STG, TNK2STG, TN16ATE, TN52STI Service time access: TOG, TN55TQX, TN53TDX, THA, TOA, TOX, THX If internal phase transmission is used, the following boards support IEEE 1588v2: OSC mode: TN11ST2 ESC mode: TOG, TN55TQX, TN53TDX, THA, TOA, TOX, THX, LEM24, LEX4, NPO2, TN54NQ2, TN54NS3, NPO2E, TN53NQ2, TN53ND2, TN53NS2, TN57NQ2, TN57ND2, TN52ND2

OSN 8800 boards that support FC1200 services
LOA, LSX, TDX, and TQX boards on the OSN 8800 support FC1200 services.

Whether the OSN 8800 supports 100G boards
Yes, the OSN 8800 supports 100G boards such as LSC and LTX.

Whether the OSN 8800 supports 2.5G boards
The following boards can be used as 2.5G boards on the OSN 8800: TOA, TOM, and LWX. Among the boards, TOA and TOM boards are tributary boards and electrical cross-connections need to be configured to corresponding line boards.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top