Whether a THA board can receive STM-16 services

9

Yes, a THA board can receive STM-16 services. At the time point, Service Type of the board is set to STM-16, the Service Mode is set to Client Mode, and Port Working Mode of the corresponding port is set to ODU1 non-convergence mode (Any->ODU1).

Other related questions:
Whether LOA boards support STM-16 services, and mapping path if STM-16 services are supported
In ODU1 non-convergence mode, LOA boards can receive STM-16 services. They map STM-16 services into ODU1 services.

Requirement for a WDM board to receive STM-4 services and service boards supporting STM-4 services
To receive STM-4 services, the WDM board must support STM-4 services. The following service boards support STM-4 services: LDM, LQM, TOA, THA, TOM, TQM, and LOA.

Restrictions on optical port selection when the TN52TOM board receives four STM-16 services
You are advised to use the TX1/RX1, TX3/RX3, TX5/RX5, and TX7/RX7 optical ports of the TN52TOM board to facilitate fiber insertion and removal.

Whether a port whose service type is set to STM-64 can receive 10GE WAN services
A port whose service type is set to STM-64 can receive 10GE WAN services. To receive 10GE WAN services, however, you are advised to set the port service type to 10GE WAN.

Whether an LQM board can receive GE services
Yes, an LQM board can receive GE services.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top