Whether a rollback can be performed after the software package is loaded during an upgrade of the OSN 6800

2

You can roll back after loading the software package to the NE. If distribution is complete and the software is to be activated, rollback cannot be performed.

Other related questions:
Why do APs not load the system software package after a batch upgrade
Locate the problem as follows: 1. Verify that the system software packages stored in active and standby partitions of the flash memory are different from the system software package to be loaded. 2. In FTP or SFTP upgrade mode, check whether the file name and path are correct.

Whether software loading is required when an OAU board is added to the OSN 6800
If the OAU board version matches the NE version, no software loading is required.

FAQs about OceanStor Toolkit
Refer to Revelations of Troublesolving cases on the right.

After APs successfully load the system software package in batches using FTP, why do they reset repeatedly and load the system software package again
The fault occurs due to a version ID mismatch. To rectify the fault, change the version ID in the AP upgrade file name to the same as the version ID in the AP upgrade file.

Whether the OSN 6800 NE software automatically upgrades the software of a new AUX board that replaces an original AUX board
Yes, the OSN 6800 NE software automatically upgrades the AUX board software.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top