Standards compliance of the OSN 9800

2

The OSN 9800 complies with various standards.

Other related questions:
Standards compliance of the OSN 8800
The OSN 8800 complies with various standards.

Standards compliance of 100GE services
100GE services comply with IEEE 802.3ba.

How do I configure a 3G interface on an AR router
When WCDMA is used, the procedure for configuring a 3G interface is as follows: [Huawei] apn profile 3gprofile //Create an APN profile. [Huawei-apn-profile-3gprofile] apn 3GNET [Huawei-apn-profile-3gprofile] user name 3guser password cipher Password@123 authentication-mode auto [Huawei-apn-profile-3gprofile] quit [Huawei] dialer-rule //Configure a dialer ACL. [Huawei-dialer-rule] dialer-rule 1 ip permit [Huawei-dialer-rule] quit [Huawei] interface cellular 0/0/0 [Huawei-Cellular0/0/0] link-protocol ppp [Huawei-Cellular0/0/0] ip address ppp-negotiate //Configure an IP address through PPP negotiation. [Huawei-Cellular0/0/0] ppp ipcp dns request //Configure a DNS server address through PPP negotiation. [Huawei-Cellular0/0/0] dialer enable-circular //Enable C-DCC. [Huawei-Cellular0/0/0] dialer-group 1 //Associate Cellular0/0/0 to the dialer access group. [Huawei-Cellular0/0/0] dialer number *99# //Configure a dialer number for calling the remote end. [Huawei-Cellular0/0/0] mode wcdma wcdma-precedence //Configure a network connection mode. [Huawei-Cellular0/0/0] apn-profile 3gprofile //Bind the APN profile to the 3G cellular interface. [Huawei-Cellular0/0/0] shutdown [Huawei-Cellular0/0/0] undo shutdown [Huawei-Cellular0/0/0] quit When CDMA2000 is used, the procedure for configuring a 3G interface is as follows: [Huawei] dialer-rule //Configure a dialer ACL. [Huawei-dialer-rule] dialer-rule 1 ip permit [Huawei-dialer-rule] quit [Huawei] interface cellular 0/0/0 [Huawei-Cellular0/0/0] link-protocol ppp [Huawei-Cellular0/0/0] ip address ppp-negotiate //Configure an IP address through PPP negotiation. [Huawei-Cellular0/0/0] ppp ipcp dns request //Configure a DNS server address through PPP negotiation. [Huawei-Cellular0/0/0] dialer enable-circular //Enable C-DCC. [Huawei-Cellular0/0/0] dialer-group 1 //Associate Cellular0/0/0 to the dialer access group. [Huawei-Cellular0/0/0] dialer number #777 //Configure a dialer number for calling the remote end. [Huawei-Cellular0/0/0] mode cdma hybrid //Configure a network reconnection mode. [Huawei-Cellular0/0/0] quit

Networking of the OSN 9800
The OSN 9800 applies to the backbone layer and core layer. It can interwork with the OSN 8800/1800 to form an E2E OTN network, which can be managed uniformly.

OptiX OSN 9800
To meet ultra-large cross-connect capacity and bandwidth requirements, Huawei presents the OptiX OSN 9800 product series. The OptiX OSN 9800 product series include the OptiX OSN 9800 U64, U32, P18 and universal platform subracks. Applied at the electrical layer, the OptiX OSN 9800 U64 and U32 subracks share boards by using unified software and hardware platforms, and can work with the OptiX OSN 9800 universal platform subrack and P18 subrack, OptiX OSN 8800 platform subrack and T16 subrack, and OptiX OSN 6800 optical subracks in WDM and OTN systems.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top