Standards compliance of the OSN 8800

14

The OSN 8800 complies with various standards.

Other related questions:
Standards compliance of the OSN 9800
The OSN 9800 complies with various standards.

Standards compliance of 100GE services
100GE services comply with IEEE 802.3ba.

How do I configure a 3G interface on an AR router
When WCDMA is used, the procedure for configuring a 3G interface is as follows: [Huawei] apn profile 3gprofile //Create an APN profile. [Huawei-apn-profile-3gprofile] apn 3GNET [Huawei-apn-profile-3gprofile] user name 3guser password cipher Password@123 authentication-mode auto [Huawei-apn-profile-3gprofile] quit [Huawei] dialer-rule //Configure a dialer ACL. [Huawei-dialer-rule] dialer-rule 1 ip permit [Huawei-dialer-rule] quit [Huawei] interface cellular 0/0/0 [Huawei-Cellular0/0/0] link-protocol ppp [Huawei-Cellular0/0/0] ip address ppp-negotiate //Configure an IP address through PPP negotiation. [Huawei-Cellular0/0/0] ppp ipcp dns request //Configure a DNS server address through PPP negotiation. [Huawei-Cellular0/0/0] dialer enable-circular //Enable C-DCC. [Huawei-Cellular0/0/0] dialer-group 1 //Associate Cellular0/0/0 to the dialer access group. [Huawei-Cellular0/0/0] dialer number *99# //Configure a dialer number for calling the remote end. [Huawei-Cellular0/0/0] mode wcdma wcdma-precedence //Configure a network connection mode. [Huawei-Cellular0/0/0] apn-profile 3gprofile //Bind the APN profile to the 3G cellular interface. [Huawei-Cellular0/0/0] shutdown [Huawei-Cellular0/0/0] undo shutdown [Huawei-Cellular0/0/0] quit When CDMA2000 is used, the procedure for configuring a 3G interface is as follows: [Huawei] dialer-rule //Configure a dialer ACL. [Huawei-dialer-rule] dialer-rule 1 ip permit [Huawei-dialer-rule] quit [Huawei] interface cellular 0/0/0 [Huawei-Cellular0/0/0] link-protocol ppp [Huawei-Cellular0/0/0] ip address ppp-negotiate //Configure an IP address through PPP negotiation. [Huawei-Cellular0/0/0] ppp ipcp dns request //Configure a DNS server address through PPP negotiation. [Huawei-Cellular0/0/0] dialer enable-circular //Enable C-DCC. [Huawei-Cellular0/0/0] dialer-group 1 //Associate Cellular0/0/0 to the dialer access group. [Huawei-Cellular0/0/0] dialer number #777 //Configure a dialer number for calling the remote end. [Huawei-Cellular0/0/0] mode cdma hybrid //Configure a network reconnection mode. [Huawei-Cellular0/0/0] quit

Difference between the standard mode and compatible mode of OSN 8800 boards
In V100R006C01 and later versions, some boards use a new board model. To distinguish the new board model from the existing board model, the new board model is called the standard mode and the original one is called the compatible mode. For boards in standard mode, the NMS displays the service mapping paths of trails or physical ports only, and all ODU-layer service mapping paths are displayed on physical ports. In standard mode, you do not need to consider logical ports of boards during cross-connect configuration. Compared with compatible mode, standard mode involves fewer mapping path layers, facilitating configuration and reducing maintenance costs.

Differences between the speedup mode and standard mode of the line board of OptiX OSN 8800
The rate in speedup mode is 11.1G and the service type is 10GE LAN. The service type is 10GE WAN in standard mode. When the speedup mode is used, the line boards need to be set to the speedup mode.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top