OSN 8800 boards that support physical-layer clock signals

13

All boards of the OSN 8800 support the following operations on physical-layer clock signals: external frequency source access and internal frequency source transmission.

Other related questions:
OSN 8800 boards that support IEEE 1588v2 clock signals
All boards of the OSN 8800 support the following operations on IEEE 1588v2 clock signals: external phase source access and internal phase source transmission.

Method used to configure physical-layer clocks for OptiX OSN 8800
For details about How do I configure physical-layer clocks for OptiX OSN 8800, you can refer to the product documentation.

Whether the TN52TDX board support physical-layer clocks
The TN52TDX board supports the transparent transmission of synchronous Ethernet (physical-layer clocks) when receiving 10GE LAN services in the Bit Transparent Mapping (11.1 G) mode.

Physical-layer clock synchronization
Physical-layer clock synchronization is a method of recovering clock frequencies from physical signals. The purpose is to achieve frequency synchronization between upstream and downstream devices so that services are transmitted properly. When an OTN network transmits clock synchronization signals, these signals can be obtained by SDH and PTN networks. No separate BITS clock source needs to be provided for the SDH or PTN network. In this way, network-wide clock synchronization is achieved.

Whether there are wavelength conversion boards that support GE signals on the OSN 8800
Yes, the OSN 8800 provides wavelength conversion boards that support GE signals, such as LOG boards.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top