Whether the OPA function can be automatically adjusted when the optical cross-connection is changed from manual mode to automatic mode

18

The OPA function is automatically adjusted when the optical cross-connection is changed from manual mode to automatic mode.

Other related questions:
Recommended NE database backup mode (manual or automatic)
By default, the NE database is automatically backed up every 24 hours. You are not advised to frequently back up the NE database in manual mode. Instead, manually back up the NE database in a specific required scenario, for example, after the deployment is complete.

Online upgrade mode of the AP supported by the AC
FTP online upgrade mode is supported.

Mechanism of automatic transmit power adjustment for APs
APs support automatic adjustment of the transmit power, and the adjustment mechanism is similar to AP channel calibration. In AC+Fit AP networking, when an AP goes offline, the AC adjusts the power of neighboring APs to compensate for the coverage hole.

How does an AP adjust the rate
When signal quality becomes bad, an AP changes the modulation mode to reduce the transmission rate. This also reduces the bit error ratio.

Cross-connection mode that the system preferentially selects when both the distributed cross-connection and centralized cross-connection are supported
The system preferentially uses the distributed cross-connection.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top