Services supported NQ2 boards

2

TN51NQ2 boards support ODU1 and ODU2 services.
TN52NQ2 boards support the following services:
Auto, ODU0, ODU1, and ODU2.

Other related questions:
Whether the NQ2 board supports tunable wavelengths
Yes, the NQ2 board supports tunable wavelengths when it is equipped with a wavelength-tuning module.

Slots for housing the NQ2 board
The slots that can house the NQ2 board vary according to subrack types.

Reason for full service configuration occurs on the NQ2 board in OptiX OSN 6800
The restrictions on the NQ2 line mode are as follows: In OptiX OSN 6800, if the TN12XCS board is used, the NQ2 board supports a service capacity of 40 Gbit/s when it is installed in slot 1, 4, 11, or 14. Only optical ports IN1/OUT1 and IN2/OUT2 of the NQ2 board are available and therefore the board supports a service capacity of 20 Gbit/s when it is installed in any of the other slots. If the TN11XCS board is used, only optical ports IN1/OUT1 and IN2/OUT2 of the NQ2 board are available and therefore the board supports a service capacity of only 20 Gbit/s regardless of the slot housing the board. In OptiX OSN 8800, the NQ2 board can be installed in any slot to support 40 Gbit/s service capacity.

Service capacity of each slot in an OptiX OSN 6800 subrack equipped with the NQ2 board
If the TN12XCS board is used, the NQ2 board supports a service capacity of 40 Gbit/s when it is installed in slot 1, 4, 11, or 14; the NQ2 board supports a service capacity of 20 Gbit/s when it is installed in any of other slots and only optical ports IN1/OUT1 and IN2/OUT2 of the board are available. If the TN11XCS board is used, only optical ports IN1/OUT1 and IN2/OUT2 of the NQ2 board are available and therefore the board supports a service capacity of only 20 Gbit/s regardless of the slot housing the board.

Boards supporting FC800 services
The TQX, TDX, and LOA boards support FC800 services.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top