Whether regeneration is supported on ND2 boards

2

ND2 boards can regenerate one channel of OTU2/OTU2e signals in both directions.

Other related questions:
Whether an ND2 board can be used as the regeneration board for the LSX board
The WDM-side signals of the TN11LSX/TN12LSX board can be regenerated using another TN11LSXR board. The WDM-side signals of the TN13LSX/TN14LSX board can be regenerated using the TN12ND2/TN52ND2/TN53ND2/TN57ND2/TN55NO2/TN55NH2/TN53NQ2/TN54NQ2/TN57NQ2 board.

Whether a cross-connect board is required when ND2 is used to achieve electrical regeneration
The cross-connect board is not mandatory in this scenario. If the cross-connect board is configured, you can configure pass-through services to achieve electrical regeneration. If no cross-connect board is configured, you can configure ND2 in electrical regeneration mode to achieve regeneration of OTU2 and OTU2e signals.

Whether the TWC board can function as the regeneration board of the LDG board
The TWC board can function as the regeneration board of the LDG board.

Whether NS4 boards in the OptiX OSN 8800 platform subracks support the regeneration mode
TN54NS4: On the OptiX OSN 8800 T64, OptiX OSN 8800 T32, and OptiX OSN 8800 universal platforms, NS4 boards support only the regeneration mode. TN56NS4: On OptiX OSN 8800 T64 and OptiX OSN 8800 universal platforms, NS4 boards support only the regeneration mode.

Whether ND2 can regenerate 10G signals over OTN equipment during long-haul transmission
Sure. ND2 can implement electrical regeneration. It can shape and regenerate signals.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top