Whether the ALM_HANGUP alarm can be cleared by a cold reset on the SC2 board

30

If the alarm persists, perform a cold reset on the OSC board such as SC2 to clear the alarm.

Other related questions:
Whether the RESET button on the TN16XCH or TN16UXCM board implements a warm reset or a cold reset on the board
A warm reset.

Whether the RESET button on the system control board of the OSN 9800 implements a warm reset or a cold reset on the board
A warm reset.

Whether the RESET button on the system control board of the OSN 8800/6800/3800 implements a warm reset or a cold reset on the board
A warm reset.

Whether SC2 boards can be connected to boards of other vendors
SC2 boards support transparent transmission of DCC bytes and do not support interconnection with boards of other vendors. The rate and code of monitoring signals on an SC2 board are 16M and CMI respectively.

Whether optical signals of the SC2 board are originated from multiplexed signals or received by the SC2 board
The OSC signals received by the SC2 board are sent from the laser of the peer SC2 board and then are split by the FIU board. They are not multiplexed signals.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top