Method used to keep the laser on an OTU board off since it is automatically turned on 5 minutes after it is turned off

1

You can set Laser shutdown to Disable in Automatic Disabling of NE Function on the U2000.

Other related questions:
Whether the laser on an FIU board can be turned off
An FIU board is not equipped with any laser. Instead, it has only optical splitters, multiplexers, and demultiplexers. Therefore, no laser can be turned off.

How to turn off LED indicators of an AT
After an AT is powered on, run the led off command in the system view to turn off the AT indicators to save energy and minimize illumination impacts on environment.

How to turn off LED indicators of an AP
After a Fit AP is powered on, log in to the AC and run the led off command in the AP system profile view to turn off all indicators on the Fit AP to save energy and minimize illumination impacts on environment. Indicators on a Fat AP cannot be turned off.

How to turn on and turn off the right of call transfer for the user registered with U19
Use the following command: Add right: config modify subscriber dn [subpbxno <0-251>] operatenewservice add newservicerights hookingtransfer Delete right: config modify subscriber dn [subpbxno <0-251>] operatenewservice del newservicerights hookingtransfer NOTE: dn is user number; subpbx can be queried by using command: show subscriber dn

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top