Homepage FAQ Transport&Access Network

Reason why optical power cannot be queried on TN13FIU in the OptiX OSN 8800

164

The TN13FIU board does not support optical power detection, while TN11FIU and TN12FIU support.

Other related questions:

Whether the loud noise of fans on OptiX OSN 8800 is normal

The noise can be loud when the fan speed is high to achieve desired heat dissipation.

Reason why the OBU1P1 board in the PID system for OptiX OSN 8800 can be used to achieve commissioning-free

In the PID system, the OBU1P1 board is configured at the receive end of a site and can automatically adjust EVOAs to ensure that the output optical power satisfies requirements, therefore achieving commissioning-free.

Reason why an enhanced OptiX OSN 8800 T32 subrack fails to be created on the NMS and an error message is displayed

Enhanced OptiX OSN 8800 T32 subracks are available since OptiX OSN 8800 V100R006C03. To ensure that an enhanced OptiX OSN 8800 T32 subrack can be created on the NMS, the NE version must be V100R006C03 or later.

Maximum power consumption of an OptiX OSN 8800 T16 subrack

The power consumption of a fully configured OptiX OSN 8800 T16 subrack is 1800 W.

Maximum power consumption of an OptiX OSN 8800 T32 subrack

The maximum power consumption of an enhanced OptiX OSN 8800 T32 subrack is 4800 W, and that of a standard OptiX OSN 8800 T32 subrack is 3500 W.