OSN 3500 II

36

The OSN 3500 II is a new generation intelligent optical switching system developed by Huawei. It applies to the network convergence layer for grooming and transmitting services such as SDH, PDH, Ethernet, ATM, and DDN. By using intelligent network technologies, the system manages services and bandwidths intelligently. It supports an embedded microwave IF board which works with the ODU of Huawei microwave device to achieve wireless service transmission. Currently, the system supports 110 Gbit/s higher-order cross-connections and 20 Gbit/s lower-order cross-connections. A single subrack of the system supports up to 90 Gbit/s access capability, and the microwave IF interface provided by the system offers 18 microwave directions.

Other related questions:
Types of ports on an EGS2 board of an OSN 3500
Types of ports on an EGS2 board of an OSN 3500: 1. Each EGS2 board supports 1000Base-SX/LX/ZX/VX Ethernet optical ports, which support auto-negotiation and comply with the IEEE 802.3z standard. An EGS2 board uses hot-pluggable SFP optical ports, which support a maximum transmission distance of 550 m in case of multimode fibers and a maximum transmission distance of 10 km in case of single-mode fibers. You can also use an optical module that supports a maximum transmission distance of 40 km or 80 km as required. 2. An N3EGS2 board also supports 1000BASE-T RJ45 Ethernet electrical ports, which support 10M, 100M, or 1000M auto-negotiation. The board uses hot-pluggable SFP electrical ports, which support a maximum transmission distance of 100 m.

MD8S board insertion in an OSN 1800 II subrack
An OSN 1800 II subrack can house a maximum of MD8S boards in slots 1�?.

OSN3500 EFT8A veneer outlet plate of the equipment
Osn3500 equipment EFT8A veneer outlet board: using panel directly, 8 road access Ethernet signals.Do not support the interface board.

OSN3500 EFT8 veneer of equipment support encapsulation format and Ethernet data frame format
1, osn3500 equipment EFT8 veneer supports encapsulation format: A. in HDLC, encapsulation format support B, LAPS support C, GFP - F support 2, osn3500 EFT8 veneer of equipment support Ethernet data frame format: IEEE 802.3, Ethernet II, IEEE 802.1 q/p.

Whether the OSN 1800 I and OSN 1800 II can be connected to cabinet indicators
The OSN 1800 I and OSN 1800 II do not provide ports for connecting to cabinet alarm indicators.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top