Method used to set the jumpers on the TN11AUX02 board of the OSN 6800


The J16, J15, J4, J3, and J2 jumpers can be set in 32 combinations, representing decimal values 0-31. The default setting of the five jumpers is 00000. The value 0 indicates the master subrack and the other values indicate slave subracks.

Other related questions:
Methods used to set the battery jumper on the SSE2SCC board
Locate the battery jumper J1 on the E2SCC board. The pins of J1 are numbered 1, 2, and 3 from bottom to top. When the battery power supply is required (the board is in trial running or normal running mode), pins 1 and 2 need to be capped. When the battery power supply is not required (the board is placed at the warehouse), pins 2 and 3 need to be capped.

Whether the TN11AUX02 board can replace the TN11AUX01 board on OSN 6800 devices

Method used to query the current temperature of a board on an OSN 6800
To query the current temperature of a board on an OSN 6800, you can view the WDM performance of the board.

Method used to set jumpers and DIP switches on the SCC board
The battery jumpers on the SCC board maintain the configurations of the board in case of a power failure. If the SCC board is in use, cap the battery jumpers to make a short circuit, which enables the battery to supply power normally. The BIOS jumpers and DIP switches help clear the board parameter area and database on the SCC board.

Method used to query the optical power of a board on the OSN 6800
Based on the signal flow, locate the board for which you want to query its optical power. Navigate to the NE Explorer, select the board, and choose Configuration > Optical Power Management. In the window that is displayed, you can view the transmit and receive optical power values of the board.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top