Whether the LSX board supports the synchronous Ethernet clock feature

5

The LSX board on the OSN 6800 supports synchronous Ethernet when the bit transparent mapping mode is used and the rate is 11.1 Gbit/s.

Other related questions:
Availability of the synchronous Ethernet clock feature on the TOM board
The TOM board does not support the synchronous Ethernet clock or IEEE 1588 clock feature.

Transmission of synchronous Ethernet clock signals on the TN52TDX board
In bit transparent transmission mode, client 10GE LAN services are directly mapped to OTU2 frames. Then the OTU2 frame frequency is increased to transmit signals. The rate is 11.1 Gbit/s, which is higher than the standard rate of OTU2 signals. In this case, the processing clock is the service tracing clock, and the speedup mode is configured for cross-connections, implementing transparent clock transmission.

Whether the TN52TDX board can transmit synchronous Ethernet clock signals
The 10GE LAN bit transparent transmission mode can directly map client services into OTU2 frames. Signals are transmitted by increasing the OTU2 frame frequency, and its rate is 11.1 Gbit/s, which is higher than the rate of standard OTU2 signals. In this transmission mode, service clocks are traced as clock sources, the line rate is configured to the speedup mode, and service clocks are transparently transmitted.

Whether the 52NS2 board supports synchronous Ethernet transparent transmission
The function of synchronous Ethernet transparent transmission depends on tributary boards instead of line boards. The 52NS2 board is a line board.

Whether the LOG board supports synchronous Ethernet transparent transmission
Yes, the LOG board supports synchronous Ethernet transparent transmission.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top