Whether timeslots are required for mapping STM-64 and 10GE LAN services to ODUk signals

2

The STM-64 and 10GE LAN services are mapped to ODUk signals in standard mapping mode which does not require timeslots.

Other related questions:
Configuration modifications required for a type change from 10GE LAN to STM-64 for services from TDX to NQ2
You need to change the service type from 10GE LAN to STM-64 for the related client-side optical port of the TDX board, and change the line rate from speedup mode to standard mode for the NQ2 board.

Whether NS3 board resources can be shared between STM-64 and 10GE LAN services on the TQX and NS3 boards
Yes. The STM-64 and 10GE LAN services provisioned on the TQX and NS3 boards of OTN equipment can share the same resources of the NS3 board. The ODU3 services need to be in speedup mode and ODU2 service mode need to be set according to the actual service type.

Whether a port whose service type is set to STM-64 can receive 10GE WAN services
A port whose service type is set to STM-64 can receive 10GE WAN services. To receive 10GE WAN services, however, you are advised to set the port service type to 10GE WAN.

Whether an OSN 1800 has boards that support STM-64 services
The LSX and LDX boards on an OSN 1800 support STM-64 services.

OSN 8800 boards that can transmit STM-64 signals
TDX or TQX.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top