Method used to modify WDM trail names in batches

35

You can modify WDM trail names in batches by following trail naming rules defined on the U2000. The procedure for modifying WDM trail names in batches is as follows:
Step 1: On the NMS, choose Service > WDM Trail > Manage WDM Trail from the main menu.
Step 2: In the Set Trail Browse Filter Criteria dialog box that is displayed, set the filter criteria and click Filter All. Filtered WDM trail information is displayed.
Note:
If you need to filter all the trails, click Filter All.
If you want to search the existing trails using new filter criteria, click Secondary Filter .
If you want to add to the list more trails that match the requirement, click Incremental Filter.
Step 3: Select one or more trails to be modified, right-click and choose Name from the shortcut menu.
Step 4: In the Confirm dialog box that is displayed, click Yes.

Other related questions:
Method used to modify DHCP on the USG6000
You can view address lease information of the USG6000 on the DHCP server, including the IP address allocated by the DHCP server, the corresponding MAC address, lease validity, and IP address binding type.

Method used to modify the IKE algorithm on AR series routers
Huawei AR series routers can be configured with the IKE authentication and encryption algorithms. The configuration procedure is as follows: 1. Run the ike proposal proposal-number command to create an IKE proposal and enter the IKE proposal view. 2. Run the authentication-algorithm { aes-xcbc-mac-96 | md5 | sha1 | sha2-256 | sha2-384 | sha2-512 | sm3 } command to configure an authentication algorithm for the IKE proposal. Starting from V200R002C00, the AR supports aes-xcbc-mac-96. Starting from V200R005C10, the AR supports SHA2-256, SHA2-384, and SHA2-512. Starting from V200R005C00, the AR supports SM3, but the NE16EX series do not support SM3. It is recommended that you do not use MD5 and SHA-1. Otherwise, security defense cannot be met. 3. Run the encryption-algorithm { des-cbc | 3des-cbc | aes-cbc-128 | aes-cbc-192 | aes-cbc-256 | sm4 } command to configure an encryption algorithm for the IKE proposal. Starting from V200R005C90, the AR supports SM4. It is recommended that you should not use DES-CBC and 3DES-CBC. Otherwise, security defense cannot be met.

Method used to modify GNE configurations on the U2000
On the main menu of the U2000, choose Administration > DCN Management. In the window that is displayed, you can modify parameters such as the GNE type and communication address.

Method used to draw a WDM wavelength allocation diagram
A wavelength allocation diagram must include the following information: NE names, board mapping, and wavelength numbers. Wavelengths are illustrated using fiber connections. The diagram can be an Excel or PPT file.

Method used to check the condition of NG WDM service channels
A meter can be used to check the condition of NG WDM service channels. A PRBS test can also be used to check the condition at deployment.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top