Whether the working and protection channels must be fixed when the OLP board is used to configure OLP protection

7

When the OLP board is used to configure OLP protection, the working channel must be the optical port 1 (RI1/TO1) of the OLP board and the protection channel must be set to optical port 2 (RI2/TO2). Otherwise, the OLP protection group cannot work normally.

Other related questions:
Ports corresponding to the working and protection channels on the OLP board of BWS 1600G devices
On the OLP board, the TO1/RI1 port is configured as the working channel and the TO2/RI2 port is configured as the protection channel.

Whether LOG boards can work with OLP boards to form protection between different channels
Yes. LOG boards can work with OLP boards to form extended intra-board 1+1 protection or client 1+1 protection.

Ports corresponding to the working and protection channels on the OLP board of BWS 1600G
On the OLP board, the TO1/RI1 port is configured as the working channel and the TO2/RI2 port is configured as the protection channel.

Method used to specify the working and protection trails of an intra-board 1+1 protection group on OLP boards
Select ports 1(RI1/TO1) and 2(RI2/TO2) of the OLP boards as the working and protection trails respectively.

WTR period of OLP protection
The OLP board supports optical line protection, intra-board 1+1 protection, and client 1+1 protection. If the reversion mode is revertive, the default WTR period is 10 minutes.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top