How to configure the CPU Usage Alarm Threshold?

5

Using the set cpu-usage threshold command, you can set the CPU usage alarm threshold and CPU usage alarm recovery threshold.
Using the undo set cpu-usage threshold command, you can restores the default CPU usage alarm threshold and CPU usage alarm recovery threshold.
By default, the CPU usage alarm threshold is 80% and the CPU usage alarm recovery threshold is 75%.
?When the CPU usage alarm threshold is lower than 60%, the default CPU usage alarm recovery threshold is 1% lower than the CPU usage alarm threshold.
?When the CPU usage alarm threshold is higher than or equal to 60%, the default CPU usage alarm recovery threshold is 5% lower than the CPU usage alarm threshold.

Other related questions:
How to check the CPU usage and memory usage?
display cpu-usage configuration [ slave | slot slot-id ] display cpu-usage configuration [ slave | slot slot-id ] display memory-usage [ slave | slot slot-id ] display memory-usage threshold [ slot slot-id ]

In FusionInsight,how to resolve the alarm ALM-12016 CPU Usage Exceeds the Threshold?
http://support.huawei.com/ehedex/pages/DOC1000113260YEF0811N/04/DOC1000113260YEF0811N/04/resources/alarm/ALM-12016.html?ft=0&id=alm12016

MIB node of CPU usage
The HUAWEI-CPU-MIB file is used to query CPU usage information of the SRU and interface card. The hwCpuDevTable is used to describe CPU usage. The OID prefix of the table is 1.3.6.1.4.1.2011.6.3.4.1. The indexes of the table are hwFrameIndex, hwSlotIndex, and hwCpuDevIndex. hwCpuDevIndex [1] Integer32 This node is used for expansion. On a single-CPU router, this value is 0. not-accessible For the SRU, the value 0 indicates the information of the primary core, and a value from 1 to 255 indicates the information of a secondary core. Example: 5 indicates that the CPU usage of the primary core of the SRU is 27% and the CPU usage of the secondary core 1 is 1%. ***** SNMP QUERY STARTED ***** 1: hwCpuDevDuty.0.0.0 (integer) 27 2: hwCpuDevDuty.0.0.1 (integer) 1 3: hwAvgDuty1min.0.0.0 (integer) 27 4: hwAvgDuty1min.0.0.1 (integer) 1 5: hwAvgDuty5min.0.0.0 (integer) 27 6: hwAvgDuty5min.0.0.1 (integer) 1 ***** SNMP QUERY FINISHED *****

View CPU usage and memory usage on s series switch
For S series switches except S1700 switches, you can run commands to display CPU and memory usage. - display cpu-usage [ slave | slot slot-id ]: displays CPU usage statistics. - display cpu-usage configuration [ slave | slot slot-id ]: displays CPU usage configuration. - display memory-usage [ slave | slot slot-id ]: displays memory usage statistics. - display memory-usage threshold [ slot slot-id ]: displays the alarm threshold for memory usage. For S series switches and E series switches except S1700 switches, you can check CPU and memory usage through the related MIB OIDs. - hwEntityCpuUsage 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.5: provides CPU usage. - hwEntityCpuUsageThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.6: provides the alarm threshold for CPU usage. - hwEntityMemUsage 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.7: provides memory usage. - hwEntityMemUsageThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.8: provides the alarm threshold for memory usage.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top