Whether the SSEM2LWC1 boards on BWS 1600G devices support 1:N protection of OCP boards

16

Question:
Do the SSEM2LWC1 boards on BWS 1600G devices support 1:N protection of OCP boards?
Answer:
The SSEM2LWC1 boards on BWS 1600G devices support 1:N protection of OCP boards.
The following is an example of the configuration command:
ops-set-ocpsbdmap: to set the mapping relations between the optical ports on the boards of a channel protection group
Input format: :ops-set-ocpsbdmap:PgId,PuId,OcpPort,OtuBid,OtuWDMPort,OtuSDHPort;
The command contains six parameters, and each parameter is unrepeatable.
Parameter values are as follows:
1: indicates the protection group ID, ranging from 1 to 255.
2: indicates the protection unit number. 1: N mode (N ranges from 1 to 8); 0–N; (0: protection unit; 1�?: working unit)
3: indicates the optical port number of the OCP board, ranging from 1 to 9. It is valid for working units 1 to 8. The value is fixed at 9 for the protection unit.
4: indicates the slot ID of the OTU board. The values are 1�? and 8�?3.
5: indicates the DWDM-side optical port number of the OTU board. The value is fixed at 1 for the LWF, LWFS, LWC1, LWS, LBE, and LBES boards.
6: indicates the SDH-side optical port number of the OTU board. The value is fixed at 2 for the LWF, LWFS, LWC1, LWS, LBE, and LBES boards.
Example of the output format: :ops-set-ocpsbdmap:1,0,9,1,1,2;

Other related questions:
Whether SSEM2LWC1 on BWS 1600G supports 1:N protection of OCP boards
Yes. SSE2LWC supports 1:N protection of OCP boards.

Whether the E7LWF board can replace the E6LWF board on BWS 1600G devices
No. Boards using the FEC and AFEC functions cannot be interconnected. If the E6LWF board must be replaced by the E7LWF board, replace the E6LWF boards at both ends.

Whether the SSE2SCC board can replace the SSE1SCC board on BWS 1600G devices
Yes. The SSE2SCC board can replace the SSE1SCC on BWS 1600G devices.

Ports corresponding to the working and protection channels on the OLP board of BWS 1600G devices
On the OLP board, the TO1/RI1 port is configured as the working channel and the TO2/RI2 port is configured as the protection channel.

Whether the SSEM1LWC board can be replaced by the SSE5LWCT02 board on BWS 1600G devices
The SSE5LWCT02 board can replace the SSEM1LWC board on BWS 1600G devices.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top