Whether the password of the LCT user on BWS 1600G devices can be changed

4

Question:
When a user logs in to an NE using the T2000 LCT, can the user change the default password of the LCT NE?
Analysis:
None
Answer:
A common user with sufficient permissions can change the password of specified users in the common NMS, Web LCT, and command line interface. Default users such as szhw, root, and lct can change their own passwords and the passwords of users with lower permissions on NEs developed based on the OSP02 platform, such as BWS 1600G. Therefore, for LCT users:
1. They must log in to NEs as the lct user from the Web LCT.
2. They need to change the password of the lct user in the user management window.
3. They can create users with lower permissions as the lct user, and set or change the passwords of these users.
Suggestion and conclusion:
None

Other related questions:
LCT user password changing on BWS 1600G
The password of the LCT user can be changed only after the LCT user successfully logs in to the LCT NMS.

Method of changing the root user password on BWS 1600G
To change the root user password, run the sm-edit-pass command.

Whether the BWS 1600G devices can transmit 2 MHz clock signals
Yes. The TC1 or TC2 (optical supervisory and timing transmission board) needs to be configured.

Whether the E7LWF board can replace the E6LWF board on BWS 1600G devices
No. Boards using the FEC and AFEC functions cannot be interconnected. If the E6LWF board must be replaced by the E7LWF board, replace the E6LWF boards at both ends.

Whether the SSE2SCC board can replace the SSE1SCC board on BWS 1600G devices
Yes. The SSE2SCC board can replace the SSE1SCC on BWS 1600G devices.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top