Command used to query the model of an OSN 6800 backplane

16

Run the :cfg-get-afbver command to query the model of an OSN 6800 backplane.

Other related questions:
Methods for querying the attenuation value of the amplifier board on the OptiX OSN 6800 device
You can run the :cfg-get-attenuation:Bid,Port,Path command to query the attenuation value of the board.

Methods for querying and deleting logical fiber connections on an OptiX OSN 6800 board by using commands
Command for querying: :cfg-get-fibermgr:SrcNeid,SrcBid,DstNeid,DstBid. Command for deleting: :cfg-del-fibermgr:SrcNeid,SrcBid,SrcPort,DstNeid,DstBid,DstPort.

Method used to query the equipment number of an OSN 6800
For an OSN 6800 or OSN 8800, you can find a certificate on the side panel of the subrack. The certificate number on the certificate should be equipment number. You can also query the certificate number using the subrack barcode or the contract ID.

Using command lines to suppress alarms for the OSN 6800
For example, to suppress R_LOS alarms on all ports, run the following command: alm-cfg-set-monstate:R_LOS,disable,0xff,0,0,"";

Method used to query the current temperature of a board on an OSN 6800
To query the current temperature of a board on an OSN 6800, you can view the WDM performance of the board.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top