Method used to query the equipment number of an OSN 6800

12

For an OSN 6800 or OSN 8800, you can find a certificate on the side panel of the subrack. The certificate number on the certificate should be equipment number.
You can also query the certificate number using the subrack barcode or the contract ID.

Other related questions:
Method used to query the current temperature of a board on an OSN 6800
To query the current temperature of a board on an OSN 6800, you can view the WDM performance of the board.

Method used to query the optical power of a board on the OSN 6800
Based on the signal flow, locate the board for which you want to query its optical power. Navigate to the NE Explorer, select the board, and choose Configuration > Optical Power Management. In the window that is displayed, you can view the transmit and receive optical power values of the board.

Methods for querying the MAC address of an OSN 6800 device
The MAC address mapping table can be queried using the arp -a command after you ping the IP address of the NE from a computer.

Command used to query the model of an OSN 6800 backplane
Run the :cfg-get-afbver command to query the model of an OSN 6800 backplane.

Method used for communication between OSN 1800 and OSN 6800
Question: In a two-level aggregation ring, the optical path between OSN 6800 and OSN 1800 is available. How to use the DCC management function of OSN 6800 to manage OSN 1800 on the NMS? Answer: The channel corresponding to OSN 1800 needs to be deleted from the DCC management on OSN 6800 before OSN 1800 can be managed on the NMS. Detailed steps: Select the OSN 6800 device, choose Function Tree > DCC Management. In DCC rate configuration, delete the GCC12_18 channel corresponding to OSN 1800. The OSN 1800 can be managed on the NMS.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top