Meaning of the label on the pigtail of an NS2 board on an OSN 6800

3

The contents of the label on a pigtail are as follows: Subrack IDs of the source and sink ports �?slot ID �?board name �?port.

Other related questions:
Meaning of the label on the fiber patch cord of an NS2 board on OSN 6800
The contents of the label on a fiber patch cord are as follows: Subrack IDs of the source and sink ports �?slot ID �?board name �?port

Power consumption of the ND2, PIU, and NS2 boards on OSN 6800 devices
The maximum power consumption values for the ND2, PIU, and NS2 boards are 70.5 W, 24 W, and 49.1 W respectively.

Power consumption of ND2, PIU, and NS2 boards on OSN 6800 devices
The maximum power consumption of ND2 boards is 70.5 W, of PIU boards is 24 W, and of NS2 boards is 49.1 W.

Possible cause of the BUS_ERR alarm that is reported on an NS2 board after OptiX OSN 6800 is upgraded
The possible cause of the BUS_ERR alarm is that the board mode is incorrect. You are advised to modify the value of the line mode parameter.

Whether there are special pigtail requirements of intra-site fiber connections on the OSN 6800
There are no special pigtail requirements except that the pigtails must be clean and free of any visual damage.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top